Automatic PMCC Flash Point Tester BPTL-238
0.01 EURAsk for quotation
On request
quantity
Produktdetaljer
Katalognummer: 1328 - BPTL-238
Produktkategori: Företag och industri > Vetenskap och laboratorium
Gentaur
Storlek: Each
Parameters
| Additional information | Applications: • Petroleum Industry, PVC Pipe Industry; |
|---|
BPTL-238
Automatic PMCC Flash Point Tester BPTL-238
Petroleum testing is the analysis during upstream, midstream, and downstream production processes of petroleum products. It is most commonly used to test petroleum product, its product components, byproducts of crude oil, fuel, natural gas, upstream oil and gas and other formats of petroleum. - It adopts an 8-inch IPS high-definition capacitive screen. Temperature rise, cover opening, ignition, detection and printing data are completed automatically, and the test arm rises and falls automatically. Electronic ignition, gas flame, automatic air cooling at the end of the test.
Ask for quotation
52-CFP101
Automatic PMCC Flash Point Tester
52-CFP101 is an automated closed cup flash point tester with automatic control measurement procedures and test data. It is designed as per ASTM D93 “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods) ”.
Ask for quotation
52-CFP103
Automatic PMCC Flash Point Tester
52-CFP103 is designed with RS-323 and 485 computer ports which can calibrate the effect of barometric pressure to the test and calculate the modified value. It modifies system deviation automatically and can simulate and show temperature-time curve. It is designed as per “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods) ” ASTM D93.
Ask for quotation
BHTP-102
Semi Automatic Cryostat BHTP-102
Cryostat is a machine that enables the operator to section the tissue at low temperature. A high-throughput cryostat produces quality sections that helps provide an accurate diagnosis. - Defrost automatically / manually , Each defrost time is 15 minutes by default, or the box temperature rises to -5°C during the defrosting process. UV sterilization, Semi-conductor refrigerant, Slice number and thickness calculation ; - 2 movement speeds of specimen clamp. light and smooth handwheel with locking device on it. Specimen clamp enables to adjust triaxially with a block in the centre to go back. - High precision guide rails made in Germany make transmission smooth durable and be able to cut hard sample.
Ask for quotation
BHTP-401
Automatic Slide Stainer BHTP-401
Staining is a process in which the tissue sample is exposed to colored dye which penetrates specific cell components to make the component of interest more visible under the microscope. Slide stainer stain prepared slides of processed tissue to enhance the contrast within a specimen for microscopic study. The operator to be heat the slides loads it into the solution reservoir and depending on requirement it is stained once or twice then rinsed and dried. - The big Tissue Stainer can stain large quantity slides at same time. Adopt PLC control system and Electronic Touch Screen, it’s convenient to operation and low - failure rate. Adopt high performance stepper motor and drive with Synchronous Belt, to ensure the balanced running, accurately fixed position, min. noise and so on. - Adopt Photoelectric switch to fixed position, it has find position memory and reset automaticallyfunctions. - It can store 10 different programs to meet the different staining requirements.
Ask for quotation
BHTP-402
Automatic Slide Stainer BHTP-402
Staining is a process in which the tissue sample is exposed to colored dye which penetrates specific cell components to make the component of interest more visible under the microscope. Slide stainer stain prepared slides of processed tissue to enhance the contrast within a specimen for microscopic study. The operator to be heat the slides loads it into the solution reservoir and depending on requirement it is stained once or twice then rinsed and dried. - Has the intelligent key function (can not see the screen blind operation), when the display screen has no display and touch function damage, the main function of the dyeing machine can be operated normally. Program intelligent dynamic detection function, can track and detect the operation of specimens, and can judge and deal with various abnormal conditions, to prevent damage to specimens. Use of ionized decomposition of harmful gases and activated carbon filtration, fully sealed internal circulation systems to ensure that operators are protected from harmful gases. The washing cylinder uses the bottom of the cylinder to feed water automatically, and drains3 cm below the cylinder opening to prevent the water from overflowing into the instrument due to the failure of the instrument pump, and also to avoid the upper spray water, because the impulse is too large to wash out the diagnostic cells. It can automatically warm up hematoxylin, eosin and other dyes, and the dyeing effect is betterand more stable (can be set to warm or not according to the requirements of use) . Equipped with a special drying cylinder, dyeing after the completion of hot air drying, the real realization of the dyeing process once completed.
Ask for quotation
Håll dig uppdaterad! Visa tidigare publikationer
By: Author , 2 Comment
Vad är autoimmunitet?
12 mars 2026
By: Author , 2 Comment
Pepsin – vad är det och var finns det?
3 mars 2026
By: Author , 2 Comment
Katalas – ett extraordinärt enzym
30 januari 2026
By: Author , 2 Comment
Achoo! Så vad är en allergi?
12 mars 2026